EPDM Rubber Roofs in Finchley, Harringay, and Across London
EPDM rubber is the handy abbreviation given to ethylene propylene diene monomer, a durable and watertight rubber sheeting material. Used extensively for finishing off flat roofs, EPDM rubber roofing is hard-wearing and requires almost no maintenance once it has been fitted. Not only is it completely watertight if fitted correctly, it is resistant to scuffs and scratches, as well as heat and cold.
EPDM Rubber Roof Installation
Fitting a new or replacement EPDM rubber roof could not be simpler. First, we strip the roof down to the joists, replacing any beams that might have been weakened or damaged. Once we’ve done that, we lay down OSB boards to form a level and sturdy roof deck on which to apply the rubber roofing.
EPDM rubber roofing comes as a sheet material. We apply a specially-formulated adhesive to the deck and to one side of the sheeting and carefully flatten it out across the whole of the roof. This removes any air pockets and forms a waterproof seal across the deck. Once the rubber is laid and the adhesive has dried, we trim and seal the roof edges, as well as any skylights, vents, and other protrusions.
EPDM Rubber Roof Maintenance and Repairs
EPDM rubber is durable stuff and, best of all, requires virtually zero maintenance. We recommend that you give it a brief inspection every year, along with your gutters and roofline, but EPDM rubber is designed to last. The most common type of damage is a tear in the material, usually the result of severe storm damage or a deliberate act.
Such damage is easy enough to repair – all we need to do is cut out a section of rubber roofing around the affected area and replace it with a new piece of rubber, cut-to-measure to fill in the gap. Of course, we also inspect the roof deck beneath the damage, to ensure it hasn’t been weakened by water ingress.
Why Choose ABC Roofing Company London?
There are plenty of reasons to choose us when considering an EPDM rubber roof for your property in Finchley, Harringay, or beyond. With more than 40 years in the business, we bring a level of expertise to the job that few other companies can manage. All work performed by our team of seasoned professionals is fully-insured and comes with a no-quibble guarantee as standard. You can check out our Google Reviews on our home page for genuine testimonials from our many satisfied customers.
EPDM Rubber Roof
Maintenance and Repairs
Clearing off moss buildup and keeping drainage outlets free stops water from sitting unnecessarily long. If a fallen branch or heavy foot traffic leaves a tear, fixing it is straightforward. We inspect the deck timber underneath for any trapped moisture before cleaning the area and bonding a dedicated rubber patch over the split, restoring a completely watertight seal without forcing you into a costly full replacement.
EPDM Rubber Roofing
Explained
It handles building movement easily, so it will not snap or pull away at the edges as seasonal changes cause walls and joists to shift naturally. Property owners across Finchley and Haringey choose it primarily because it lasts upwards of fifty years with minimal attention while keeping rain completely locked out of the timber below.
FAQs
EPDM is short for ethylene propylene diene monomer. It is a synthetic rubber supplied as flexible sheeting and used to waterproof flat and low-slope roofs. The membrane is bonded to a prepared deck, with the edges and any roof penetrations carefully sealed as part of the installation.
Every joint needs to remain watertight throughout the life of a roof, so reducing the number of seams also reduces potential weak points. Where the size and shape allow, a large continuous membrane can cover much of the deck. Roof edges, outlets and penetrations still require accurate detailing.
The membrane is flexible and can move as the roof responds to warmer and colder conditions. That flexibility is one reason EPDM suits many flat roofs. It still needs to be bonded to a suitable deck and correctly finished around edges, walls and openings to perform as intended.
Weak or rotten decking should not be hidden under a new covering. ABC Roofing Company London removes the old roof as necessary, checks the joists and deck, and replaces timber that is no longer sound. This provides a stable surface for the adhesive and membrane.
A local tear or puncture can often be repaired using compatible EPDM material after the area has been cleaned and prepared. The deck beneath should also be checked for moisture or deterioration. Replacement may be considered when damage is widespread or the surrounding membrane is no longer serviceable.
Inspect the roof periodically, keep outlets and gutters clear, and remove debris without using sharp tools. Check edges and areas around vents or rooflights after severe weather. Avoid unnecessary foot traffic and protect the membrane if other contractors need temporary access across the roof.
